Injection mortar VK, 420 ml, Koxial cartridge
Injection mortar VK: All-round chemical anchor for concrete, masonry and rebar
The VK composite mortar guarantees secure and long-lasting fastening of heavy loads in concrete and masonry. Since the VK is approved for cracked and non-cracked concrete, the VK is the right injection mortar for your project in all cases, as around 90% of the concrete in Germany is considered cracked. In addition, its approval for subsequent reinforcement connections (rebar) makes the chemical dowel a real all-rounder when it comes to anchoring heavy loads. Processing is particularly pleasant due to the short curing time. For particularly cold temperatures, we recommend the VK Nordic, which can be used even at installation temperatures of -20 °C.
Our VK is suitable, for example, for:
- Canopies
- Awnings
- Carpots
- Gerlander
- Stairs
We have been producing injection mortar here in Willich, near Düsseldorf, for 40 years. All development and production steps up to the final product test take place in-house because we want to be sure of the quality of our products and the associated safety of our customers. Our values and quality made us part of the Würth Group in 2013.
We combine quality and service. Convince yourself.
FAQ
The VK is for cracked and non-cracked concrete, solid stone
and perforated stone masonry.
- Steel structures
- Wooden constructions
- railings
- stairs
- Steel consoles
- awnings
- Canopies
- Gates
- Consoles
- piping
- grid
- Satellite antennas
The borehole must be created according to the technical data sheet
be cleaned.
The tubular film must be cut open before use
become
The enclosed static mixer must be used.
A preliminary run must be carried out before use in the borehole
become. Only then can
be sure that the two
Components of the mortar mix in the correct proportions.
When used in perforated bricks please only
Use the sieve sleeve provided for this purpose.
Pay attention to curing times.
The Chemofast VK is available in various packaging solutions. The 420ml coaxial cartridge must be pressed out with a 2K squeezer.
On request, the injection mortar VK is available in the following cartridge sizes: 160 ml, 165 ml, 280 ml, 300 ml, 330 ml, 345 ml, 380-420 ml and 825 ml
Approvals and data sheets
German:
ETA-08-0237- Concrete - Chemofast VK.pdf
ETA-20-0557 - Masonry - Chemofast VK.pdf
ETA-09-0277- Subsequent reinforcement connections - Chemofast VK.pdf
English:
ETA-08-0237- concrete - Chemofast VK .pdf
ETA-20-0557- Masonry - Chemofast VK.pdf
ETA-09-0277 - Post-installed rebar connection - Chemofast VK.pdf
