Injection system EP1000
EP1000 injection mortar: The composite mortar for maximum performance in concrete
The Chemofast EP1000 composite mortar is ideal for subsequent reinforcement connections (rebar) as well as highly stressed fastenings in concrete, whether cracked or non-cracked. In particular, large drilling diameters and/or large anchoring depths can be implemented very easily due to the long processing time. In addition, the EP1000 scores points with its proven suitability for fire and its approval for seismic loads in categories C1 and C2. With its 100-year service life and approval for applications with hollow drills and diamond core bits, even in water-filled boreholes, the EP1000 will become an indispensable element on any construction site.
Examples of construction companies using EP1000 composite mortar:
- Subsequent reinforcement connections
- Anchoring in diamond-drilled and water-filled drill holes
- Bridge cap anchors
- Seismic applications (C1 and C2)
- Heavy steel structures
- Silo systems
- High shelves
- Soundproof walls
The quality of our products and the safety of our customers are part of our standard. As a manufacturer, we naturally see it as our responsibility to supply our customers with a high-quality product and to create a flawless application result. This attitude and the outstanding quality of our products made us part of the Würth Group in 2013.
Discover original quality only from Chemofast – the inventor of chemical dowels.
FAQ
The EP1000 is for non-cracked and cracked concrete
suitable
- Subsequent reinforcement connections
- Anchoring in diamond-drilled and water-filled boreholes
- Bridge cap anchorages
- Seismic applications (C1 and C2)
- Heavy steel structures
- silos
- High shelves
- Soundproof walls
The borehole must be created according to the technical data sheet
be cleaned
The enclosed static mixer must be used.
A preliminary run must be carried out before use in the borehole
become. Only then can
be sure that the two
Components of the mortar mix in the correct proportions.
Curing times must be taken into account
The EP1000 injection mortar is filled into side-by-side cartridges and must therefore be pressed out with a 2K squeezer. A pneumatic squeezing device should be used for the 1400ml cartridge.
Then contact us using the contact form or
at 02154/8123-460.
