Peeler cartridges

The 2-component coaxial cartridge can be processed in a 1-component standard pistol (silicone pistol) using a patented cutting plunger. The cutting plunger in the cartridge is fixed with a clip behind the two pistons.

When squeezing out, the gun thrust plate pushes the cutting ram and the downstream A and B pistons in the axial direction. The cutting ram splits the area of ​​the B pipe that is emptied after the B piston has advanced into two halves. The two halves of the B-tube are guided through the two semicircular openings of the cutting ram on the inner wall of the A-tube so that the ejection process is never impaired or the ejection pressure is increased.


  • Easy processing possible with a standard gun
  • Correct mixing ratio guaranteed throughout cartridge use
Back to blog